"I have used pretty much all of
the simulators out there, Hspice, HPspice, PSpice,
Mspice, Accusim, Spectre, SpectreRF and the list
goes on... but none are as simple, straightforward
to use as SIMetrix."
SMD Inductors from
http://www.epcos.com/web/tools/html/lizenz_e.html?download=/web/tools/download/psimidwe.zip
Accept/decline License warranty and liability agreement.
NOTE: you will need to edit the library to remove
duplicate B82498-B3820-K part.
To put these parts into a SIMetrix library:
- Drag and drop the .lb file into the command
shell window (top left).
- Once SIMetrix has digested the file and rebuilt
the catalogue, go to File/Model Library/Associate
Models and Symbols ....
The new components should appear in the left hand
list under 'Unknown'.
- Select all the parts in the list that begin
with 'B824'. Do not select the three entries called
'SIMID_BASE1', 'SIMID_BASE2' and 'SIMID_BASE3'.
- Then choose a Category from the top right drop
down list or create a new category such as 'SIMID'
- Then choose 'Inductor' from the drop down symbol
list.
- Click 'Apply Changes'.
- Wait for the catalogue to rebuild.
- Now go back to the left hand list and select
the three entries called 'SIMID_BASE1', 'SIMID_BASE2'
and 'SIMID_BASE3'.
- Choose 'Not catalogued' category from the top
right drop down list
- Click 'Apply Changes'.
- Wait for the catalogue to rebuild.
- Off you go!!
NTC thermistors from
http://www.epcos.com/web/tools/html/lizenz_e.html?download=/web/tools/download/ntc_psp.exe
Accept/decline License warranty and liability agreement.
Varistors from
http://www.epcos.com/web/tools/html/lizenz_e.html?download=/web/tools/download/var_psp.zip
Accept/decline License warranty and liability agreement.
